Silicon and Package Innovation
1st gen
2nd gen
3rd gen
• First 2A/3A sync Buck in SOIC8
(5x6mm) pkg in the world – since 2005
• More than 20+ p2p competitors
• First 2A /3A sync Buck in SOT23
(3x3mm) pkg in the world – since 2011
• TI also dev. P2P part
• Other 5+ p2p competitors
• First 2A /3A sync Buck in SOT563/SOT583
(1.6x1.6mm) pkg in the world – since 2015
MPS has lead the DC/DC market over the last 10 years with advanced BCD
device process and assembly/packaging technology.
Additionally, MPS also offers industry-leading power converters in
QFN and CSP packages
MP2147 – 4A, Sync, Step-Down Switcher
FEATURES
• Wide 2.8V-to-5.5V Operating Input Range
• Adjustable Output from 0.6V
• Up to 4A Output Current
• Low IQ: 40μA • 1.2MHz Switching Frequency
• EN for Power Sequencing
• 1% FB Accuracy
• External PWM/PFM Mode Control
• COT control offers fast transient response
• External VCON Control
• 22mΩ and 14mΩ Internal Power MOSFETs
• 1.5ms Internal SS Time with Pre-Bias Startup
APPLICATIONS
• Portable Instruments
• Storage
• Battery-Powered Devices
• High performance DSPs, FPGAs
MPQ4572 60V2A Buck
Features
• Wide 4.5V to 60V Operating Input Range
• 2A Continuous Output Current
• High-Efficiency, Synchronous Mode Control
• 250mΩ/45mΩ Internal Power MOSFETs
• Configurable Frequency Up to 2.2MHz
• 180°Out-of-Phase SYNC Out Clock
• 40μA Quiescent Current
• FB-Tolerance: 1% at Room Temp, 2% at Full Temp
• Selectable AAM or Forced CCM Operation during Light-Load Conditions • Power Good Indicator
• Low-Dropout Mode
• Short-Circuit Protection with Hiccup Mode
• VIN Under-Voltage Lockout (UVLO)
• Thermal Shutdown
• Available in a QFN-12 (2.5mmx3mm) Package
• Available in a Wettable Flank Package
36V, 3A, Low Quiescent Current Synchronous Step Down Converter
Features
• Designed for Automotive Applications:
• Survives 42V Load Dump
• Supports 3.1V Cold Crank
• Continuous Output Current 0.5A-3A
• Continuous Operation Up to 30V
• Junction Temperature Operation from -40°C to +150°C
(Absolute Maximum)
• Increases Battery Life:
• 1μA Shutdown Supply Current
• 20μA Sleep Mode Quiescent Current
• Advanced Asynchronous Mode (AAM) Increases
Efficiency under Light Loads
• High Performance for Improved Thermals:
• Integrated 70mΩ High-Side and 50mΩ Low-Side
MOSFETs
• 65ns Minimum On Time and 50ns Minimum Off Time
• Optimized for EMC/EMI:
• Frequency Spread Spectrum Modulation
• Symmetric VIN Pinout
• CISPR25 Class 5 Compliant
• 350kHz to 2.5MHz Configurable Switching Frequency
• MeshConnect™ Flip-Chip Package
• Available in a QFN-12 (2mmx3mm)
• Package or a QFN-12 (3mmx4mm)
MPQ3367 6CH Backlighting LED Driver
• 3.5V to 36V Input Voltage Range
• 6 Channels with Max. 150mA per Channel
• Internal 100mΩ, 50V MOSFET
• Programmable Up to 2.2MHz Fsw
• Multi-Dimming Operation Mode thru PWM input
Including:
1. Direct PWM Dimming
2. Analog Dimming
3. Mix Dimming with 25%/12.5% transfer point
• 15000:1 Dim Ratio in PWM Dim at
Fpwm≤200Hz
• Excellent EMI Performance, Frequency Spread
Spectrum
• I2C Interface
• Phase Shift Function for PWM Dimming
• 2.5% Current Matching
• Optional LED Current Auto Decrement at
High Temperature
• LED Short/Open, OTP, OCP, Inductor
Short Protection
• Fault Indicator Signal Output
• QFN24-4mmX4mm and TSSOP28-EP Package
• AEC-Q100
MPQ7225
Cascadable 18V, 16-Channel Current Sink Matrix LED Driver
Features and Benefits
Built to Handle Tough Automotive Transients
• Cold crank down to 2.5V
Cooler Thermals and Excellent System Efficiency
• AFC (Adaptive Feedback Control) dynamically optimizes pre-regulator output
• 300mV current sink headroom at 200mA
Robust Communication for Reliable Control Across Distanced PCBs
• 2Mbps CAN compatible with differential interface
Optimized EMI/EMC
• Programmable phase shift and slew rate
• Frequency spread spectrum (internal clock)
• Selectable PWM dimming frequency
Easy Scalability
• Cascade up to 16 ICs to support up to 256 channels
• 3LED topology can support up to 768 LEDs
• Pin-programmable device address
Safety-Oriented
• Functional safety featured for ASIL systems
• Protection functions including thermal warning, LED open, LED short, pin
open/short (ISET)
• Failsafe (/FS) pin and fault registers for system diagnostics