汽车电子IC现货商SSD102 车载主控 欢迎来电垂询

东芝提供专为各种车载通信应用而特别设计的RF IC。 这些IC提供有关交通拥堵、事故、公路路口状况等的实时语音导航，并允许注册车辆通过收费站时*停车进行缴费，从而改善了驾驶体验。
电子道路收费（ETC）系统
**短程通信（DSRC）
多车道自由流（MLFF）： 允许多条相邻车道上的驾驶员能够同时与RSU进行通信，*减速实施缴费，*设置收费关卡。

Scaler Register (Bank=00, Registers 01h ~ 9Fh)
Index Name Bits Description
TRGC 1 Trigger Condition.
0: Active low for level trigger/tailing edge trigger.
1: Active high for level trigger/leading edge trigger.
INT_TRIG 0 Interrupt Trigger.
0: Generate an edge trigger interrupt.
1: Generate a level trigger interrupt.
17h INTPULSE 7:0 Default : 0x0F Access : R/W
INTPULSE[7:0] 7:0 Interrupt Pulse width by reference clock.
18h INTSTA 7:0 Default : 0x00 Access : R/W
INTSTA[7:0] 7:0 Interrupt Status byte A.
Bit 7: MVD input NOT “no **”.
Bit 6: MVD “HSYNC lock”.
Bit 5: MVD NOT “no color”.
Bit 4: MVD degree error.
Bit 3: MVD input “no **”.
Bit 2: MVD NOT “HSYNC lock”.
Bit 1: MVD “no color”.
Bit 0: MVD HSYNC change.
19h INTENA 7:0 Default : 0x00 Access : R/W
INTENA[7:0] 7:0 Interrupt Enable control byte A.
0: Disable interrupt.
1: Enable interrupt.
1Ah INTSTB 7:0 Default : 0x00 Access : R/W
INTSTB[7:0] 7:0 Interrupt Status byte B.
Bit 7: MCU D2B interrupt 2.
Bit 6: MCU D2B interrupt 1.
Bit 5: MCU D2B interrupt 0.
Bit 4: MVD CC interrupt.
Bit 3: MVD SECAM detect.
Bit 2: MVD PAL switch error.
Bit 1: MVD “ADC7_0ACT”.
Bit 0: MVD NOT “ADC7_0ACT”.
1Bh INTENB 7:0 Default : 0x00 Access : R/C
INTENB[7:0] 7:0 Interrupt Enable control byte B.
0: Disable interrupt.
1: Enable interrupt.
1Ch INTSTC 7:0 Default : 0x00 Access : R/W
Sigmastar Confidential for
芯智国际有限公司
Internal Use Only
Security Level: Confidential A
Copyright © 2018 SigmaStar Technology Corp. All rights reserved.
Scaler Register (Bank=00, Registers 01h ~ 9Fh)
Index Name Bits Description
INTSTC[7:0] 7:0 Interrupt Status byte C.
Bit 7: Output VSYNC interrupt.
Bit 6: Input VSYNC interrupt.
Bit 5: ATG ready interrupt.
Bit 4: ATP ready interrupt.
Bit 3: ATS ready interrupt.
Bit 2: MVD probe ready interrupt.
Bit 1: MCU D2B interrupt 4.
Bit 0: MCU D2B interrupt 3.
1Dh INTENC 7:0 Default : 0x00 Access : R/C
INTENC[7:0] 7:0 Interrupt Enable control byte C.
0: Disable interrupt.
1: Enable interrupt.
1Eh INTSTD 7:0 Default : 0x00 Access : R/W
INTSTD[7:0] 7:0 Interrupt Status byte D.
Bit 7: WDT interrupt.
Bit 6: Keypad wake-up interrupt.
Bit 5: Jitter interrupt.
Bit 4: Horizontal total change interrupt.
Bit 3: Vertical total change interrupt.
Bit 2: Horizontal lost count interrupt.
Bit 1: Vertical lost count interrupt.
Bit 0: Standard change interrupt.
1Fh INTEND 7:0 Default : 0x00 Access : R/C
INTEND[7:0] 7:0 Interrupt Enable control byte D.
0: Disable interrupt.
1: Enable interrupt.
20h ~
21h
- 7:0 Default : - Access : -
- 7:0 Reserved.
22h MPL_M 7:0 Default : 0x6F Access : R/W
MP_ICTRL[2:0] 7:5 Charge pump current set.
MPL_M[4:0] 4:0 MPLL divider ratio setting.
23h OPL_CTL0 7:0 Default : 0x40 Access : R/W
- 7:6 Reserved.
SSC_EN 6 Output PLL spread spectrum.
0: Disable.
1: Enable

SPHE8202TQ /Q /RQ /V SPHE8104LW /TW EN25T80 /16 SDRAM/DDR SDRAM ： W9812G6JH-6 W9864G6XH-6 HY57V641620FTP-7 H57V1262GTR-75C EM636165TS-7 EM638165TS-7 EM639165TS-7G EM63A165TS-6G 音频IC： TDA7388 TDA7496 TDA7377 TDA7296 TDA7381 TDA7384 TDA2030 LM1875T TEF6621 TEF6606 TDA2050 TDA1517P PCF8563T AT24C02 运放IC： NJM3414AM/AV NJM2107F NJM4558 NJM4556 NJM4560 LM324 LM358 电源管理IC： MP1580HS MP1540DJ-LF-Z MP1584EN-LF-Z MP2303ADN-LF-Z MP3202DJ-LF-Z MP2605DQ-LF-Z MP2307DN-LF-Z MP7720DS-LF-Z MP1430DN-LF-Z LM2576/2596 马达驱动IC： BA5954FP、BA5888FP、 BA6287F、BA6847 BA6849、BA3121F、BU1924F LCD驱动 IC： CS75853 LC75853/PT6553 LC72131 触摸IC： ADS7846E TSC2003I TSC2007 TSC2046

SSD102 Sigmastar LQFP-100 全新原装驱动解码IC 代用MST703-LF的详细页面。系列:SSD，品牌:Sigmastar，型号:SSD102，类型:驱动IC，功率:，驱动芯片类型:液晶屏驱动IC，针脚数:100，用途:电视机，封装:LQFP-100，批号:2018+，特色服务:配单，应用领域:智能家居，产品说明:原厂原包装，货号:102，包装:原包装。SSD102SigmastarLQFP-100全新原装驱动解码IC代用MST703-LF。